-
Product: NuvoWall-SOR Flat and L-shaped rectangular non-perforated "screw-on" type wall panels manufactured from 14 Ga. (.064") thick 3003-H14 alloy aluminum and painted in a black semi-gloss polyester powder finish. Wall system features a ½” reveal on all sides of the panels.
-
Product: NuvoWall-SOR Flat and L-shaped rectangular non-perforated "screw-on" type wall panels manufactured from 14 Ga. (.064") thick 3003-H14 alloy aluminum and painted in a black semi-gloss polyester powder finish. Wall system features a ½” reveal on all sides of the panels.
-
Product: NuvoWall-SOR Flat and L-shaped rectangular non-perforated "screw-on" type wall panels manufactured from 14 Ga. (.064") thick 3003-H14 alloy aluminum and painted in a black semi-gloss polyester powder finish. Wall system features a ½” reveal on all sides of the panels.
-
Product: NuvoWall-SOR, Perforated screw-on type wall panels manufactured from
16 Ga. (.063") thick 304 alloy stainless steel. Panels provided with a ½” black painted reveal between panels. Perforation pattern is 3/16” square holes on ½” straight centers, 14% open. Stainless steel finish was #4 satin brush.
-
Product: NuvoWall-SOR, Perforated screw-on type wall panels manufactured from
16 Ga. (.063") thick 304 alloy stainless steel. Panels provided with a ½” black painted reveal between panels. Perforation pattern is 3/16” square holes on ½” straight centers, 14% open. Stainless steel finish was #4 satin brush.
-
Product: NuvoWall-SOR, Perforated screw-on type wall panels manufactured from
16 Ga. (.063") thick 304 alloy stainless steel. Panels provided with a ½” black painted reveal between panels. Perforation pattern is 3/16” square holes on ½” straight centers, 14% open. Stainless steel finish was #4 satin brush.
-
Product: NuvoWall-HOB, Non-perforated hook-on type wall panels manufactured from 14Ga. (.063") thick 3003-H14 aluminum with soft-vee type butt joints, painted in a three-coat fluoropolymer metallic silver finish.
-
Product: NuvoWall-SOB, Perforated and non-perforated screw-on type wall and soffit panels manufactured from 14Ga. (.078”) thick 304 alloy stainless steel. Wall panels on main walls were provided with a random swirl brush finish with other panels and trim provided in a #4 satin brush.
-
Product: NuvoWall-SOB, Perforated and non-perforated screw-on type wall and soffit panels manufactured from 14Ga. (.078”) thick 304 alloy stainless steel. Wall panels on main walls were provided with a random swirl brush finish with other panels and trim provided in a #4 satin brush.
-
Product: NuvoWall-SOB, Perforated and non-perforated screw-on type wall and soffit panels manufactured from 14Ga. (.078”) thick 304 alloy stainless steel. Wall panels on main walls were provided with a random swirl brush finish with other panels and trim provided in a #4 satin brush.
-
NuvoWall-HO, Custom fabricated mesh type hook-on wall panels manufactured from .020” diameter polished stainless steel wire in a 304 alloy. Mesh features .040”square openings with a 44% open area prior to being crushed into its final form (Montana). The mesh was fitted over a 2”x2” aluminum angle frame painted in a matte black powder coated finish. Acoustical insulation consisted of 1” thick black faced fibreglass insulation installed into each panel.
-
Product: NuvoWall-SOR Flat and L-shaped rectangular non-perforated "screw-on" type wall panels manufactured from 14 Ga. (.064") thick 3003-H14 alloy aluminum and painted in a black semi-gloss polyester powder finish. Wall system features a ½” reveal on all sides of the panels.
-
Product: NuvoWall-HOB, Non-perforated hook-on type wall panels manufactured from 14Ga. (.063") thick 3003-H14 aluminum with soft-vee type butt joints, painted in a three-coat fluoropolymer metallic silver finish.
-
Product: NuvoWall-T+S, Perforated tab and slot screw-on type panels manufactured from 1/8” thick 3003-H14 aluminum. Perforation pattern, 1” diameter holes on 1¼” staggered centers, 57% open. Panels were provided with a two-coat fluoropolymer finish.
-
Product: NuvoWall-SOR Non-perforated brake formed ready-to-install wall panels manufactured from 16Ga. (.062”) thick 304 alloy stainless steel.
Metal Wall Panel Systems
When durability, acoustics, or simply the beauty of metal is a major criterion for interior vertical surfaces, Nelson Architectural has a solution. Available in a wide variety of designs and finishes, we manufacture metal wall panel systems for commercial, institutional and transportation facilities across North America.
Metal wall panels are available in a variety of metal alloys best suited for the intended application and typically range from .064 up to .125 inches in thickness. The most common panel alloys are 3003-H14 for aluminum and T-304 and T-316 for stainless steel. For optimal results, panels intended for anodizing plain (Mill) or brushed finishes generally require the use of a 5005-H34 alloy.
In addition to the aforementioned options, baked powder enamel, and two and three-coat fluoropolymer paints are commonly used to enhance the appearance of our panels. Nelson also offers a wide range of linear, non-directional and selective brushed finishes, particularly in stainless steel, as well as faux-wood options like our exclusive Ourborite™ finish.
Metal wall panels are available in non-perforated and perforated varieties. Non-perforated panels offer little in terms of acoustical properties other than reflecting sound where required. As a result they are generally used in instances where other features, for example ease of cleaning, are predominant factors. To achieve good acoustics, (High NRC or Noise Reduction Coefficient values) a perforated wall panel with an open area of 15 to 20 percent, together with an acoustical fleece (SoundTex®), should typically be used in combination with a fiberglass matt for optimum sound absorption. A wide variety of perforation patterns are available (straight, diagonal, staggered), as well as a range of hole sizes (round, square, oblong).
At Nelson Architectural we draw from a resource base of over 150 highly skilled employees, many of whom have been engaged in this type of manufacture at Nelson for more than 25 years. Our ability to custom engineer and fabricate metal wall panel systems to meet the rigorous demands of architects and designers makes for a perfect fit from the conception to the completion of a new space.
For information on Nelson Architectural or to solicit our engagement on a potential project, please contact a Nelson Sales Representative near you, or contact us directly. Detailed drawings, product, and finish samples pertaining to our metal wall panel systems are available upon request.
