-
NuvoPanel-TSP Perforated ”hook-on” type (Torsion spring) ceiling panels manufactured from 14Ga. (.064) thick 3003-H14 alloy aluminum and painted in a black semi-gloss polyester powder finish. Ceiling system features a ½” reveal on all sides of the panels. Acoustical insulation consists of black SoundTex acoustical fleece.
-
Product: NuvoPanel-NT Perforated “clip-on” type ceiling panels manufactured from 20Ga. (.032”) thick 3003-H14 alloy aluminum complete with black SoundTex acoustical fleece.
-
Product: NuvoPanel-NT Perforated “clip-on” type ceiling panels manufactured from 20Ga. (.032”) thick 3003-H14 alloy aluminum complete with black SoundTex acoustical fleece.
-
Product: NuvoPanel-NT Perforated “clip-on” type ceiling panels manufactured from 20Ga. (.032”) thick 3003-H14 alloy aluminum complete with black SoundTex acoustical fleece.
-
Product: NuvoPanel-TSP Perforated ”hook-on” type (Torsion spring) ceiling panels manufactured from manufactured from (.050") thick 3003-H14 aluminum c/w black SoundTex acoustical fleece, in a white powder coat finish.
-
Product: NuvoPanel-TSP Perforated ”hook-on” type (Torsion spring) ceiling panels manufactured from manufactured from (.050") thick 3003-H14 aluminum c/w black SoundTex acoustical fleece, in a white powder coat finish.
-
Product: NuvoPanel-TSP Perforated ”hook-on” type (Torsion spring) ceiling panels manufactured from 12 Ga. (.080") thick 3003-H14 aluminum c/w black SoundTex acoustical fleece, painted in a three-coat fluoropolymer silver finish.
-
Product: NuvoPanel-TSP Perforated ”hook-on” type (Torsion spring) ceiling panels manufactured from 12 Ga. (.080") thick 3003-H14 aluminum c/w black SoundTex acoustical fleece, painted in a three-coat fluoropolymer silver finish.
-
Product: NuvoPanel-TSP Perforated ”hook-on” type (Torsion spring) ceiling panels manufactured from 12 Ga. (.080") thick 3003-H14 aluminum c/w black SoundTex acoustical fleece, painted in a three-coat fluoropolymer silver finish.
-
Product: NuvoForm and NuvoPanel-LI Custom fabricated stainless steel ribs, light fixture housings etc., manufactured from 14Ga. (.078”) thick 304 alloy stainless steel in a non-directional brush finish. Non-perforated curved ceiling panels provided in 14Ga. (.063”) thick 3003-H14 alloy aluminum and painted in a white semi-gloss polyester powder enamel.
-
Product: NuvoPanel-TSP Perforated ”hook-on” type (Torsion spring) ceiling panels manufactured from manufactured from (.050") thick 3003-H14 aluminum c/w black SoundTex acoustical fleece, in a white powder coat finish.
-
Product: NuvoPanel-TSP Perforated ”hook-on” type (Torsion spring) ceiling panels manufactured from 14 Ga. (.063") thick 3003-H14 aluminum, painted in a silver metallic polyester powder enamel c/w black SoundTex acoustical fleece.
-
Product: NuvoPanel-HO Perforated ”hook-on” type ceiling panels manufactured from
14 Ga. (.063") thick 3003-H14 aluminum, painted in a matte silver metallic polyester powder enamel c/w black SoundTex acoustical fleece.
-
Product: NuvoPanel-TSP Perforated ”hook-on” type (Torsion spring) ceiling panels manufactured from 14Ga. (.064) thick 3003-H14 alloy aluminum and painted in a black semi-gloss polyester powder finish. Ceiling system features a ½” reveal on all sides of the panels. Acoustical insulation consists of black SoundTex acoustical fleece.
-
Product: NuvoPanel-TSP Perforated embossed interior and exterior ”hook-on” type (Torsion spring) ceiling panels manufactured from 14 Ga. (.063") thick 3003-H14 aluminum. Panels provided in size 48” x 49” and painted in a three-coat fluoropolymer silver finish.
-
Product: NuvoPanel-TSP Perforated embossed interior and exterior ”hook-on” type (Torsion spring) ceiling panels manufactured from 14 Ga. (.063") thick 3003-H14 aluminum. Panels provided in size 48” x 49” and painted in a three-coat fluoropolymer silver finish.
-
Product: NuvoPanel-TSP Perforated embossed interior and exterior ”hook-on” type (Torsion spring) ceiling panels manufactured from 14 Ga. (.063") thick 3003-H14 aluminum. Panels provided in size 48” x 49” and painted in a three-coat fluoropolymer silver finish.
-
Product: NuvoPanel-TSP Perforated embossed interior and exterior ”hook-on” type (Torsion spring) ceiling panels manufactured from 14 Ga. (.063") thick 3003-H14 aluminum. Panels provided in size 48” x 49” and painted in a three-coat fluoropolymer silver finish.
-
Product: NuvoPanel-TSP Perforated embossed interior and exterior ”hook-on” type (Torsion spring) ceiling panels manufactured from 14 Ga. (.063") thick 3003-H14 aluminum. Panels provided in size 48” x 49” and painted in a three-coat fluoropolymer silver finish.
-
Product: NuvoPanel-TSP Perforated embossed interior and exterior ”hook-on” type (Torsion spring) ceiling panels manufactured from 14 Ga. (.063") thick 3003-H14 aluminum. Panels provided in size 48” x 49” and painted in a three-coat fluoropolymer silver finish.
-
Product: NuvoPanel T+S, Exterior tab and slot type trapezoidal non-perforated ceiling panels manufactured from 14Ga. (.063”) thick 3003-H14 alloy aluminum. A progressive system featuring panels with tabs and slots that engages with adjacent panels to create a visible soft-vee butt joint system between them. Trailing edges of each panel is attached with screws to a (Primary) support grid, consisting of aluminum furring channels. Finish is a semi-gloss beige polyester powder paint.
-
Product: NuvoPanel-TSP Perforated embossed exterior ”hook-on” type (Torsion spring) ceiling panels manufactured from 14 Ga. (.063") thick 3003-H14 aluminum. Panels provided in size 48” x 49” and painted in a three-coat fluoropolymer silver finish.
-
Product: NuvoPanel-TSP Perforated embossed exterior ”hook-on” type (Torsion spring) ceiling panels manufactured from 14 Ga. (.063") thick 3003-H14 aluminum. Panels provided in size 48” x 49” and painted in a three-coat fluoropolymer silver finish.
-
Product: NuvoPanel-HO Flat hook-on type perforated ceiling panels manufactured from 4 mm (.157”) thick NuvoBond composite material. Panel provided in size 43" x 59" x 2" complete with 0.25" x 2.75" oblong holes on 0.5" x 3.25" centres, 43 percent open area. Panel provided in a pre-painted three coat metallic silver fluoropolymer finish.
-
Product: NuvoPanel-TSP Flat custom perforated and curved non-perforated hook-on (Torsion Spring) ceiling panels in size 3’-9” x 16’-10” and manufactured from 4mm (.157”) NuvoBond composite material. Ceiling panels provided in a pre-painted three coat metallic silver fluoropolymer finish. Segmented panels provided in the same material and finish in size, 2’-6” x 4’-9”.
-
Product: NuvoPanel-TSP Flat custom perforated and curved non-perforated hook-on (Torsion Spring) ceiling panels in size 3’-9” x 16’-10” and manufactured from 4mm (.157”) NuvoBond composite material. Ceiling panels provided in a pre-painted three coat metallic silver fluoropolymer finish. Segmented panels provided in the same material and finish in size, 2’-6” x 4’-9”.
-
Product: NuvoPanel-TSP Custom fabricated flat hook-on (Torsion Spring) ceiling panels manufactured from 20Ga. (.038”) thick 304 alloy stainless steel. Panels are laminated to a 1” thick MDF board and supported from the perimeter molding surrounding each cloud.
-
Product: NuvoPanel-HO Perforated hinged hook-on style curved ceiling panels manufactured from 14 Ga. (.063”) thick 3003-H14 alloy aluminum including ¼” thick aluminum ribs, rectangular support tubing, threaded rods. Panel provided with 1/8” x 1” oblong holes on ¼” straight centers with on open area of 43%. System finish was a three-coat silver metallic fluoropolymer paint.
-
Product: Nuvopanel-TSP Flat acid etched and laminated full accessible glass panel ceiling system manufactured from 14Ga. (.078”) thick 304 alloy stainless steel. The glass panels are set into stainless steel frames and secured with powder coated galvanized angles to allow swing down of panels for access to plenum, without any disengagement of the glass from the support frame. The support structure is fabricated from 1/8” galvanized steel and to be adequately secured to support structure based on local building code.
-
Product: NuvoPanel-TSP Custom fabricated hook-on (Torsion Spring) ceiling panels and grid manufactured from 16 Ga. (.063") thick 304 alloy stainless steel frames and grid. Lay-in panels consisted of laminated ¼” thick onyx slabs. Ceiling grid also incorporated recessed accessible fluorescent lamps mounted in retractable cassettes.
-
Product: NuvoPanel-RTSP™ Integrated radiant perforated ”hook-on” type (Torsion spring) ceiling panels manufactured from 14Ga. (.064) thick 3003-H14 alloy aluminum and painted in a pre-painted metallic silver polyester finish. Ceiling system features a 3/8” reveal on all sides of the panels. Perforation pattern is .101” round holes on 5/32” staggered centers with a 37% open area. Acoustical and thermal insulation consists of 1” thick black faced fibreglass insulation. Radiant system by Twa Panels Systems.
-
Product: NuvoPanel-RTSP Radiant perforated ”hook-on” type (Torsion spring) ceiling panels manufactured from 14Ga. (.064) thick 3003-H14 alloy aluminum and painted in white polyester powder paint. Ceiling system features a 3/8” reveal on all sides of the panels. Perforation pattern is .125” round holes on 1/4 staggered centers with a 20% open area. Acoustical and thermal insulation consists of 1”” thick black faced fiberglass insulation. Radiant system by Twa Panels Systems.
-
Product: NuvoPanel-TSP Perforated embossed exterior ”hook-on” type (Torsion spring) ceiling panels manufactured from 14 Ga. (.063") thick 3003-H14 aluminum. Panels provided in size 48” x 49” and painted in a three-coat fluoropolymer silver finish.
-
Product: NuvoPanel-TSP Perforated embossed exterior ”hook-on” type (Torsion spring) ceiling panels manufactured from 14 Ga. (.063") thick 3003-H14 aluminum. Panels provided in size 48” x 49” and painted in a three-coat fluoropolymer silver finish.
-
Product: NuvoPanel-TSP Exterior perforated hook-on (Torsion Spring) ceiling panels manufactured from 1/8” 3003-H14 alloy aluminum. Panels perforated with 1¾” diameter holes on 2½” staggered centers with a 45% open area. For the exterior panels fitted with a ¼” thick clear polycarbonate lens and with a polyvinyl blue overlay film. Panels and grid finished in a black polyester powder enamel.
-
Product: NuvoPanel-TSP Exterior and interior perforated hook-on (Torsion Spring) ceiling panels manufactured from 1/8” 3003-H14 alloy aluminum. Panels provided in size 48” x 120” and perforated with 1” diameter holes on 2” staggered centers with a 22% open area. For the exterior panels fitted with a black polypropylene ½” x ½” bird screen with the interior panels fitted with a 1” thick black faced fibreglass mat. Panels and grid finished with a black two-coat fluoropolymer paint.
-
Video:
Metal Ceiling Systems
Where durable, long-lasting and cost-effective non-commodity metal ceilings are required, Nelson Architectural has provided solutions for commercial, institutional and transportation facilities across North America. What makes Nelson’s metal ceiling systems different from commodity-type systems is our unique fabricating capabilities that enable us to provide a wide variety of design options, from endless size or geometry variations, to material thickness and finishes.
Metal ceiling panels are available in a variety of metal alloys best suited for the intended application and typically range from .032 up to .125 inches in thickness. The most common alloys are 3003-H14 for aluminum and T-304 for stainless steel panels. For optimal results, panels intended for anodizing plain (Mill) or brushed finishes generally require the use of a 5005-H34 alloy.
In addition to the aforementioned options, baked powder enamel, and two and three-coat fluoropolymer paints are commonly used to enhance the appearance of our panels. Nelson also offers a wide range of linear, non-directional and selective brushed finishes, particularly in stainless steel, as well as faux-wood options like our exclusive Ourborite™ finish.
Metal ceiling panels are available in non-perforated and perforated varieties. Non-perforated panels offer little in terms of acoustical properties and as a result are generally used in instances where other features, for example ease of cleaning or a high degree of light reflectance, are predominant factors. To achieve good acoustics (sound absorption), a perforated aluminum panel with an open area of 15 to 20 percent, together with a black acoustical fleece (SoundTex®), could produce an NRC (Noise Reduction Coefficient) of 0.70 or higher. For areas that require either increased NRC values or a higher degree of sound blocking (typically referred to as STC or Sound Transmission Class), SoundTex® used in combination with a fibreglass matt should be used for optimum sound absorption.
A wide variety of perforation patterns are available (straight, diagonal, staggered), as well as a range of hole sizes (round, square, oblong).
At Nelson Architectural we draw from a resource base of over 150 highly skilled employees, many of whom have been engaged in this type of manufacture at Nelson for more than 25 years. Our ability to custom engineer and fabricate metal ceiling systems to meet the rigorous demands of architects and designers makes for a perfect fit from the conception to the completion of a new space.
For information on Nelson Architectural or to solicit our engagement on a potential project, please contact a Nelson Sales Representative near you, or contact us directly. Detailed drawings, product, and finish samples pertaining to our metal ceiling systems are available upon request.
